Collectie Cr10S Pro Fan Duct

Collectie Cr10S Pro Fan Duct. Also made the duct walls a bit thicker. Source project can be seen here. Fits in place with the original screws. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid.

Beste Download Free Stl File Cr10s Pro Fan Duct Object To 3d Print Cults

I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. When my cr10s pro hotend blew out the other day, it took my fan duct with it. Upgraded the oem fan duct with better mounting points. Best printed with tree support but also no problem to do without. Fits in place with the original screws.

V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.

Now with the revision there are 3 mounting points. Upgraded the oem fan duct with better mounting points. Nozzle.04 layer height.02 infill 100%. I already have two 5015 ready to install. Also made the duct walls a bit thicker. 1921 creality cr10s pro fan duct 3d models. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. If so feel free to copy and modify the onshape project to your.

If you installed a microswiss hotend. Works with stock hotends also. Source project can be seen here. Be careful when removing the tabs of the original fan. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. If so feel free to copy and modify the onshape project to your. Sieht glaube ich so aus wie der originale. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Fits in place with the original screws. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. I was tired of the fan duct always falling off from the one mounting screw.. Source project can be seen here.

Now with the revision there are 3 mounting points.. Every day new 3d models from all over the world. Also made the duct walls a bit thicker. 08.02.2019 · thingiverse ist wieder online.

Nozzle.04 layer height.02 infill 100%. Also made the duct walls a bit thicker. Sieht glaube ich so aus wie der originale. Fan replacement for the cr10s pro. 08.02.2019 · thingiverse ist wieder online... I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing.

Fits in place with the original screws. Works with stock hotends also. Fits in place with the original screws. 08.02.2019 · thingiverse ist wieder online. Every day new 3d models from all over the world. Sieht glaube ich so aus wie der originale. I found this one which looks good, but i wanted to make some changes to make it easier to print. If so feel free to copy and modify the onshape project to your. This duct sits at a slightly higher profile so it clears the bed... Sieht glaube ich so aus wie der originale.

V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Use petg for higher temperature resistance. Fits in place with the original screws. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Sieht glaube ich so aus wie der originale. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. I was tired of the fan duct always falling off from the one mounting screw... Air flow remains the same as the original!

If you installed a microswiss hotend. Works with stock hotends also. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. 1921 creality cr10s pro fan duct 3d models. Air flow remains the same as the original! Sieht glaube ich so aus wie der originale. This duct sits at a slightly higher profile so it clears the bed. Fan replacement for the cr10s pro. When my cr10s pro hotend blew out the other day, it took my fan duct with it. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing.. I was tired of the fan duct always falling off from the one mounting screw.

Now with the revision there are 3 mounting points. Changed the direction of the duct section to point a little more downward. Vielleicht werde ich später mal noch was verbessern.. I found this one which looks good, but i wanted to make some changes to make it easier to print.

Fan duct to replace the stock duct on the cr10s pro... . Now with the revision there are 3 mounting points.

This duct sits at a slightly higher profile so it clears the bed. If so feel free to copy and modify the onshape project to your. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted... 1921 creality cr10s pro fan duct 3d models.

V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Nozzle.04 layer height.02 infill 100%. Upgraded the oem fan duct with better mounting points. I was tired of the fan duct always falling off from the one mounting screw... Every day new 3d models from all over the world.

V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Source project can be seen here. Now with the revision there are 3 mounting points. Use petg for higher temperature resistance. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Air flow remains the same as the original! Upgraded the oem fan duct with better mounting points. 1921 creality cr10s pro fan duct 3d models. 08.02.2019 · thingiverse ist wieder online. I already have two 5015 ready to install... 08.02.2019 · thingiverse ist wieder online.

If you installed a microswiss hotend.. If so feel free to copy and modify the onshape project to your. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. If you installed a microswiss hotend. Fan duct to replace the stock duct on the cr10s pro. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. I already have two 5015 ready to install. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. Fan replacement for the cr10s pro. Also made the duct walls a bit thicker. Source project can be seen here.

I already have two 5015 ready to install. It can still be printed with no. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. I found this one which looks good, but i wanted to make some changes to make it easier to print. Sieht glaube ich so aus wie der originale. Fits in place with the original screws.

The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. . I found this one which looks good, but i wanted to make some changes to make it easier to print.

Sieht glaube ich so aus wie der originale.. Every day new 3d models from all over the world.. I found this one which looks good, but i wanted to make some changes to make it easier to print.

Works with stock hotends also. 08.02.2019 · thingiverse ist wieder online. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Fan replacement for the cr10s pro. Works with stock hotends also. I was tired of the fan duct always falling off from the one mounting screw. Upgraded the oem fan duct with better mounting points. Vielleicht werde ich später mal noch was verbessern... Fits in place with the original screws.

Changed the direction of the duct section to point a little more downward. If you installed a microswiss hotend. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. Upgraded the oem fan duct with better mounting points.

Also made the duct walls a bit thicker. Nozzle.04 layer height.02 infill 100%. Source project can be seen here. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Fan duct to replace the stock duct on the cr10s pro.

Fan replacement for the cr10s pro. Fan replacement for the cr10s pro. If so feel free to copy and modify the onshape project to your. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Every day new 3d models from all over the world. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. I found this one which looks good, but i wanted to make some changes to make it easier to print. Source project can be seen here. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. I found this one which looks good, but i wanted to make some changes to make it easier to print.

Every day new 3d models from all over the world.. This duct sits at a slightly higher profile so it clears the bed. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. I was tired of the fan duct always falling off from the one mounting screw. Fits in place with the original screws. Upgraded the oem fan duct with better mounting points. Air flow remains the same as the original! Works with stock hotends also. Vielleicht werde ich später mal noch was verbessern. If you installed a microswiss hotend.. 1921 creality cr10s pro fan duct 3d models.

Source project can be seen here.. Upgraded the oem fan duct with better mounting points. Fan duct to replace the stock duct on the cr10s pro. Nozzle.04 layer height.02 infill 100%. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Best printed with tree support but also no problem to do without. Be careful when removing the tabs of the original fan. Works with stock hotends also. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there.. Be careful when removing the tabs of the original fan.

I was tired of the fan duct always falling off from the one mounting screw. Changed the direction of the duct section to point a little more downward. 1921 creality cr10s pro fan duct 3d models. I was tired of the fan duct always falling off from the one mounting screw. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. I found this one which looks good, but i wanted to make some changes to make it easier to print. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. It can still be printed with no. Best printed with tree support but also no problem to do without. Source project can be seen here. Source project can be seen here.

Nozzle.04 layer height.02 infill 100%. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Source project can be seen here. Every day new 3d models from all over the world.

The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there.. Fan duct to replace the stock duct on the cr10s pro. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. Source project can be seen here. I already have two 5015 ready to install.. This duct sits at a slightly higher profile so it clears the bed.

I already have two 5015 ready to install.. Upgraded the oem fan duct with better mounting points. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Every day new 3d models from all over the world. Source project can be seen here. Nozzle.04 layer height.02 infill 100%. Changed the direction of the duct section to point a little more downward... Source project can be seen here.

Sieht glaube ich so aus wie der originale.. Fits in place with the original screws. Now with the revision there are 3 mounting points. This duct sits at a slightly higher profile so it clears the bed. Nozzle.04 layer height.02 infill 100%. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.. I found this one which looks good, but i wanted to make some changes to make it easier to print.

1921 creality cr10s pro fan duct 3d models. Nozzle.04 layer height.02 infill 100%... Air flow remains the same as the original!

Sieht glaube ich so aus wie der originale. Also made the duct walls a bit thicker. I found this one which looks good, but i wanted to make some changes to make it easier to print. I already have two 5015 ready to install. Every day new 3d models from all over the world. If you installed a microswiss hotend. If so feel free to copy and modify the onshape project to your. 1921 creality cr10s pro fan duct 3d models. Be careful when removing the tabs of the original fan.. I already have two 5015 ready to install.

I was tired of the fan duct always falling off from the one mounting screw. Click to find the best results for creality cr10s pro fan duct models for your 3d printer.

Source project can be seen here. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. I already have two 5015 ready to install. This duct sits at a slightly higher profile so it clears the bed. Vielleicht werde ich später mal noch was verbessern. 08.02.2019 · thingiverse ist wieder online. When my cr10s pro hotend blew out the other day, it took my fan duct with it. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. I was tired of the fan duct always falling off from the one mounting screw. Source project can be seen here. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing.. Also made the duct walls a bit thicker.

Changed the direction of the duct section to point a little more downward. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Changed the direction of the duct section to point a little more downward. I already have two 5015 ready to install. I found this one which looks good, but i wanted to make some changes to make it easier to print. Works with stock hotends also. Vielleicht werde ich später mal noch was verbessern. If so feel free to copy and modify the onshape project to your. I was tired of the fan duct always falling off from the one mounting screw. Source project can be seen here.. 08.02.2019 · thingiverse ist wieder online.

Also made the duct walls a bit thicker. Also made the duct walls a bit thicker. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Use petg for higher temperature resistance. Source project can be seen here. Every day new 3d models from all over the world.

I found this one which looks good, but i wanted to make some changes to make it easier to print. Source project can be seen here. If so feel free to copy and modify the onshape project to your. Now with the revision there are 3 mounting points. Vielleicht werde ich später mal noch was verbessern. When my cr10s pro hotend blew out the other day, it took my fan duct with it... The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there.

Fan replacement for the cr10s pro. When my cr10s pro hotend blew out the other day, it took my fan duct with it. I already have two 5015 ready to install. Air flow remains the same as the original! Works with stock hotends also. If you installed a microswiss hotend. Be careful when removing the tabs of the original fan. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Use petg for higher temperature resistance.. Sieht glaube ich so aus wie der originale.

Changed the direction of the duct section to point a little more downward. .. I was tired of the fan duct always falling off from the one mounting screw.

Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Fits in place with the original screws. Air flow remains the same as the original! This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Now with the revision there are 3 mounting points.. I already have two 5015 ready to install.

Upgraded the oem fan duct with better mounting points. Fits in place with the original screws.

I was tired of the fan duct always falling off from the one mounting screw. If so feel free to copy and modify the onshape project to your. This duct sits at a slightly higher profile so it clears the bed. Nozzle.04 layer height.02 infill 100%. Also made the duct walls a bit thicker.. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid.

Use petg for higher temperature resistance. Fan replacement for the cr10s pro. Works with stock hotends also. Now with the revision there are 3 mounting points. Fits in place with the original screws. Best printed with tree support but also no problem to do without.. Be careful when removing the tabs of the original fan.

Vielleicht werde ich später mal noch was verbessern. When my cr10s pro hotend blew out the other day, it took my fan duct with it. 1921 creality cr10s pro fan duct 3d models. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. 08.02.2019 · thingiverse ist wieder online. If so feel free to copy and modify the onshape project to your. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Vielleicht werde ich später mal noch was verbessern.. 08.02.2019 · thingiverse ist wieder online.

Vielleicht werde ich später mal noch was verbessern.. Be careful when removing the tabs of the original fan. Changed the direction of the duct section to point a little more downward. Best printed with tree support but also no problem to do without. I found this one which looks good, but i wanted to make some changes to make it easier to print. Fan replacement for the cr10s pro. Vielleicht werde ich später mal noch was verbessern... I was tired of the fan duct always falling off from the one mounting screw.

I was tired of the fan duct always falling off from the one mounting screw.. Best printed with tree support but also no problem to do without. Vielleicht werde ich später mal noch was verbessern. Works with stock hotends also. I was tired of the fan duct always falling off from the one mounting screw. Click to find the best results for creality cr10s pro fan duct models for your 3d printer.. Works with stock hotends also.

Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Now with the revision there are 3 mounting points. This duct sits at a slightly higher profile so it clears the bed.

Best printed with tree support but also no problem to do without. I was tired of the fan duct always falling off from the one mounting screw. Air flow remains the same as the original! The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. Fits in place with the original screws. It can still be printed with no. Use petg for higher temperature resistance. Nozzle.04 layer height.02 infill 100%. When my cr10s pro hotend blew out the other day, it took my fan duct with it. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. If you installed a microswiss hotend.

Be careful when removing the tabs of the original fan... 1921 creality cr10s pro fan duct 3d models. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Now with the revision there are 3 mounting points. Changed the direction of the duct section to point a little more downward... Sieht glaube ich so aus wie der originale.

Fits in place with the original screws. Sieht glaube ich so aus wie der originale.

If so feel free to copy and modify the onshape project to your. Fan replacement for the cr10s pro. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Works with stock hotends also. Sieht glaube ich so aus wie der originale. Every day new 3d models from all over the world. It can still be printed with no. Fan duct to replace the stock duct on the cr10s pro.. Click to find the best results for creality cr10s pro fan duct models for your 3d printer.

Nozzle.04 layer height.02 infill 100%. When my cr10s pro hotend blew out the other day, it took my fan duct with it. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Air flow remains the same as the original! This duct sits at a slightly higher profile so it clears the bed. I was tired of the fan duct always falling off from the one mounting screw.. 1921 creality cr10s pro fan duct 3d models.

V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. 1921 creality cr10s pro fan duct 3d models. This duct sits at a slightly higher profile so it clears the bed. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. It can still be printed with no. 08.02.2019 · thingiverse ist wieder online. Vielleicht werde ich später mal noch was verbessern. Changed the direction of the duct section to point a little more downward.. Now with the revision there are 3 mounting points.

This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. . Fits in place with the original screws.

1921 creality cr10s pro fan duct 3d models. I was tired of the fan duct always falling off from the one mounting screw. If you installed a microswiss hotend. Best printed with tree support but also no problem to do without. If so feel free to copy and modify the onshape project to your. Every day new 3d models from all over the world.. Fan duct to replace the stock duct on the cr10s pro.

1921 creality cr10s pro fan duct 3d models. Be careful when removing the tabs of the original fan. It can still be printed with no. This duct sits at a slightly higher profile so it clears the bed. 1921 creality cr10s pro fan duct 3d models. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there.

Now with the revision there are 3 mounting points. Also made the duct walls a bit thicker. Best printed with tree support but also no problem to do without. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. I found this one which looks good, but i wanted to make some changes to make it easier to print.. 1921 creality cr10s pro fan duct 3d models.

If you installed a microswiss hotend.. Fan replacement for the cr10s pro. Source project can be seen here. Every day new 3d models from all over the world.. Best printed with tree support but also no problem to do without.

08.02.2019 · thingiverse ist wieder online. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. Be careful when removing the tabs of the original fan. Works with stock hotends also. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there... The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there.

Changed the direction of the duct section to point a little more downward. 08.02.2019 · thingiverse ist wieder online. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid. If you installed a microswiss hotend... Fan replacement for the cr10s pro.

Air flow remains the same as the original! Changed the direction of the duct section to point a little more downward. 1921 creality cr10s pro fan duct 3d models. Upgraded the oem fan duct with better mounting points. Nozzle.04 layer height.02 infill 100%. Source project can be seen here. 08.02.2019 · thingiverse ist wieder online.. 08.02.2019 · thingiverse ist wieder online.

It can still be printed with no.. Best printed with tree support but also no problem to do without. Fits in place with the original screws. Vielleicht werde ich später mal noch was verbessern. 1921 creality cr10s pro fan duct 3d models. I found this one which looks good, but i wanted to make some changes to make it easier to print. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.. Every day new 3d models from all over the world.

I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing.. Sieht glaube ich so aus wie der originale.. It can still be printed with no.

08.02.2019 · thingiverse ist wieder online... . This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid.

It can still be printed with no. Air flow remains the same as the original! Vielleicht werde ich später mal noch was verbessern. Every day new 3d models from all over the world... V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.

The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. If you installed a microswiss hotend. 1921 creality cr10s pro fan duct 3d models. Use petg for higher temperature resistance. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. Fits in place with the original screws. Fan duct to replace the stock duct on the cr10s pro. I found this one which looks good, but i wanted to make some changes to make it easier to print.. I already have two 5015 ready to install.

If you installed a microswiss hotend. If you installed a microswiss hotend. I was tired of the fan duct always falling off from the one mounting screw. 08.02.2019 · thingiverse ist wieder online. Upgraded the oem fan duct with better mounting points. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. Fan replacement for the cr10s pro. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. This is made from the v3 from mclareniak, the only modification i have made is to add some structural braces to these arms, to make them a little stronger and more rigid.

Vielleicht werde ich später mal noch was verbessern. If you installed a microswiss hotend. I found this one which looks good, but i wanted to make some changes to make it easier to print. I liked the original by mclareniak however i found the arms holding it to the fan to be a little brittle and easy to snap off, and also allowed the duct to droop a little when printing. Fan replacement for the cr10s pro. 1921 creality cr10s pro fan duct 3d models. Fan duct to replace the stock duct on the cr10s pro. Source project can be seen here... Changed the direction of the duct section to point a little more downward.

I found this one which looks good, but i wanted to make some changes to make it easier to print... Vielleicht werde ich später mal noch was verbessern. Source project can be seen here. Works with stock hotends also... Now with the revision there are 3 mounting points.

Also made the duct walls a bit thicker.. Works with stock hotends also. If you installed a microswiss hotend.

Also made the duct walls a bit thicker.. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. When my cr10s pro hotend blew out the other day, it took my fan duct with it. Best printed with tree support but also no problem to do without. Also made the duct walls a bit thicker. This duct sits at a slightly higher profile so it clears the bed. I found this one which looks good, but i wanted to make some changes to make it easier to print. 1921 creality cr10s pro fan duct 3d models. Be careful when removing the tabs of the original fan. If so feel free to copy and modify the onshape project to your. This duct sits at a slightly higher profile so it clears the bed.

Be careful when removing the tabs of the original fan. Upgraded the oem fan duct with better mounting points. Vielleicht werde ich später mal noch was verbessern... V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted.

When my cr10s pro hotend blew out the other day, it took my fan duct with it. Changed the direction of the duct section to point a little more downward. Be careful when removing the tabs of the original fan. Source project can be seen here. Sieht glaube ich so aus wie der originale. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. I already have two 5015 ready to install. Nozzle.04 layer height.02 infill 100%. If you installed a microswiss hotend... 1921 creality cr10s pro fan duct 3d models.

Use petg for higher temperature resistance. Now with the revision there are 3 mounting points.. Nozzle.04 layer height.02 infill 100%.

I already have two 5015 ready to install. It can still be printed with no. This duct sits at a slightly higher profile so it clears the bed. Works with stock hotends also. Be careful when removing the tabs of the original fan. Source project can be seen here. Also made the duct walls a bit thicker. Fits in place with the original screws. Upgraded the oem fan duct with better mounting points. V1 is my first iteration on the project v2 got a better air tube and dimensions v3 is a test for the adjustement guide v4 is the latest version please note that depending on your nozzle height the fanduct height could be not perfectly adjusted. Vielleicht werde ich später mal noch was verbessern... It can still be printed with no.

Fan duct to replace the stock duct on the cr10s pro. Vielleicht werde ich später mal noch was verbessern. 08.02.2019 · thingiverse ist wieder online. Changed the direction of the duct section to point a little more downward. I found this one which looks good, but i wanted to make some changes to make it easier to print. Click to find the best results for creality cr10s pro fan duct models for your 3d printer. The fan duct i was using was a good one and if i don't see any improvement i will go back to it, but i thought maybe it was time to see what else there is out there. 1921 creality cr10s pro fan duct 3d models. Best printed with tree support but also no problem to do without... This duct sits at a slightly higher profile so it clears the bed.